This is a printer friendly page!
Plastinum Polymer
Technologies Can Deliver Nearly 100% Recycled Waste Which For The First Time Can Be Fully
Re-Used At A Competitive Price Solving Some Of The Up To Now Intractable Environmental
Issues Facing The Industry. Up To Now, Recycling Was At Best 70% Of Waste Material And
Prohibitively Costly
Services
Consumer Services
(PLNU-OTC: BB)
Plastinum Polymer Technologies Corp.
245 Park
Avenue, 39th Floor
New York, NY 10167
Phone: 212-792-4030
Jacques Mot
Chief Executive Officer
Interview conducted by:
Lynn Fosse, Senior Editor
CEOCFOinterviews.com
Published September 14, 2007
Company
Profile:
Plastinum Polymer Technologies Corp., listed on The OTC Bulletin Board® (OTCBB) (ticker
symbol "PLNU"), owns the patent rights associated with a technology through
which multiple immiscible thermoplastics can be blended.
Plastinum's mission is to
commercialize the technology through applications in the virgin plastic markets (polymer
alloys) and the plastic recycling sector (i.e. recycling of mixed plastic streams from
obsolete electronic equipment, car shredder residue).
The company owns and develops patented and proprietary plastic
processing technology, whereby various kinds of immiscible thermoplastics fuse through
mechano-chemical commotion. The uniqueness of this blending technology stems from its
potential cost-effective applications in many fields of the plastic industry from the
recycling of mixed plastic waste streams to the creation of new thermo plastic compounds.
BLENDYMER is Plastinum's proprietary polymer processing
technology which uniquely enables complete fusion, through mechano-chemical processing, of
previously incompatible polymers.
Focusing on the current WEEE (Waste Electrical and Electronic
Equipment) EU legislation the company has specifically targeted the mixed plastic scrap
sector for the launch of its first commercial-size plants. Currently in this sector, a
very small percentage of plastics are being recycled, 90% is being exported to countries
in the developing world. Current plastic recycling technologies rely on sorting and
separating the different plastics by type of polymer prior to recycling. This whole
process is incomplete and expensive; a high percentage of what remains plastic is dumped
in landfills or incinerated with troublesome ecological implications.
The company believes that its one-of-a-kind fusion technology
can be of great value in particular in this sector, since it can treat various types of
plastic scrap, and it does not require separation. More importantly, the process is
environmentally friendly and can be undertaken on economically viable terms.
CEOCFO: Mr. Mot, what is your vision as CEO and how do
you get there?
Mr. Mot: My vision for the company is to develop
a recycling plant in Europe in the Netherlands, and at the same time one in California to
take care of recycling for electronic and electrical equipment waste, what we call in
Europe WEEE (Waste Electrical and Electronic Equipment) legislation.
CEOCFO: What does Plastinium
have that enables you to do this?
Mr. Mot: The big issue with recycling electronic
equipment is the fact that plastics, which is about 25-30% of the product is not
completely recyclable with todays known technologies. It is also the only material
within the waste stream that is not being recycled. The mixed plastic waste stream is a
very complex stream of material that consist of up to 10 different types of (mainly
incompatible) thermoplastics, conventional separation technology are maybe effective for
30% of these streams, while Plastinums process is up to 95% effective. Conventional
recyclers that depend on separation, need stable clean individual polymer streams in order
to process an acceptable commercial product, these processing systems are not tolerant.
Plastinums system however takes the stream as a whole and can accept variation in
the stream, as long as it is thermo plastic, this is a major advantage to the WEEE
processors too as they will now be able to recycle the complete WEEE stream, instead of
having to export or landfill.
CEOCFO: Why have you chosen to
work on electrical equipment as opposed to some other form of plastics?
Mr. Mot: Our first trials were with waste were
from Hewlett Packard, with very positive results. The other motivation is the WEEE and US
legislation, which is creating an overwhelming stream of material for us to process! It is
a very large market with no direct solution."
CEOCFO: Please tell us about
the two plants you are working on?
Mr. Mot: Both of the plants have a capacity of
12½ thousand tons. They will both be equipped with five of our proprietary technology
driven machines. Every machine has the capacity to process two-and-a-half thousand tons of
waste on a yearly basis. The plants will be equipped with unique pretreatment systems, in
order to separate non-plastic impurities like copper, circuit board, glass and wood. (On
average with the WEEE recyclers, their mixed plastic stream is contaminated with 15% to
25% of non-plastics). At that moment the mixed plastic stream is processed by the
BLENDYMER350. BLENDYMER350 is Plastinum's industrial capacity processing
machine, with a capacity of 2 ½ tons annually.
CEOCFO: How do you get what you
are going to recycle?
Mr. Mot: basically we take the shredder residue
from the electronic waste processors, as they should no longer export or landfill for
legal and ethical reasons
CEOCFO: Is it just leftover
parts?
Mr. Mot: It is the shredder residue, which is
the end of the line product, this consists of 85% mixed plastic, the remaining is copper,
circuit board, glass and wood.
CEOCFO: How are they currently
disposing of electronic products?
Mr. Mot: Where collecting and recycling programs
exist, approximately 70% of the waste is being disposed of in an environmentally
responsible way, i.e. metal recycling; however 30%, the shredder residue (the contaminated
mixed plastic) fraction is being exported to Asia. But you have to realize that most of
the material collected is being exported as a whole, to developing countries
CEOCFO: Are companies required
to look for solutions?
Mr. Mot: In Europe, for example, it has become a
law. In the US, it is a bit different because it depends on state-to-state legislation;
California is one of the first to become very much concerned about this issue. No one
really wants to have their products dumped somewhere and being dangerous to the
environment and to peoples lives.
CEOCFO: How do you reach your
potential customer and whom are you targeting first?
Mr. Mot: The potential customers are plastic end
product manufacturers. We are targeting OEM within the electronics casing
industry.
CEOCFO: How cost effective is
it compared to method currently in use?
Mr. Mot: Highly cost effective compared to any
of the other partial solutions.
CEOCFO: Is this proprietary
technology?
Mr. Mot: Absolutely, protected IP!
CEOCFO: Are there any competing
technologies?
Mr. Mot: There is not a competing technology
when it comes to producing a new compound from mixed plastic waste.
CEOCFO: So you are a complete
solution!
Mr. Mot: Yes, the first time that all plastics
can be fully recycled potentially closed loop, meaning that the electronics industry would
reuse the compound; over and over, that is the real breakthrough.
CEOCFO: Where are you in the
process of the plants being up and ready to go?
Mr. Mot: "We are doing a PIPE right
now, which we expect to finalize by the end of September and then we expect the opening to
be toward the end of March in Holland. In the US we expect to be in operation by the
second quarter of 2008."
CEOCFO: So you are on your way.
Mr. Mot: Absolutely, partners are rolling in
with waste and we intend to be producing commercially shortly
CEOCFO: Is your team in place
for the commercialization phase?
Mr. Mot: Most are in place in Holland. In
California, we are getting started with searches for people and suitable sites; a lot will
depend on our first suppliers and their location and needs. We are in the process of
moving the head office out of New York to California.
CEOCFO: Why should investors be
interested now?
Mr. Mot: We have come up with a solution that so
far is the only solution for complete recycling. This activity has the potential to become
the market leader in mixed plastic recycling. Our company does not only do recycling, it
will produce new compounds by fusing VIRGIN POLYMERS. Several multinationals; for example
in the car and packaging industry; have approached us on potential R&D programs in
order to develop complete new compounds. We do have two distinct activities there. With
both a global approach and market leader potential
CEOCFO: So there is more to it?
Mr. Mot: It is not only recycling, there is
R&D and new compounds.
CEOCFO: What should people
remember most about Plastinum?
Mr. Mot: Thats obvious, the only
company bringing closed loop recycling within the mixed plastics waste market!
This article and the interview contains information that is forward-looking in
that it describes events and conditions which Plastinum Polymer Technologies Corp.
(Plastinum) reasonably expects to occur in the future. Expectations for
the future performance of the business of Plastinum are dependent upon a number of
factors, and there can be no assurance that Plastinum will achieve the results or be able
to conduct its operations as contemplated herein. Certain statements in this article
and the interview using the terms "believe", "expect",
"intend" or words of similar import, are forward-looking information within the
meaning of Rule 175 under the Securities Act of 1933 and Rule 3b-6 under the Securities
Exchange Act of 1934, and are subject to the safe harbor created by those rules. All
statements, other than statements of fact, included in this article and the interview,
including, without limitation, statements regarding our potential future plans and
objectives, are forward-looking statements that involve risks and uncertainties. There can
be no assurance that such statements will prove to be accurate and actual results and
future events could differ materially from those anticipated in such statements. Factors
that could cause actual results to differ materially from those in the forward-looking
statements include, among other things, the following: general economic and business
conditions; competition; unexpected changes in technologies and technological advances;
ability to commercialize and manufacture products; results of experimental studies;
research and development activities; changes in, or failure to comply with, governmental
regulations; and the ability to obtain adequate financing. This information is qualified
in its entirety by cautionary statements and risk factors disclosure contained in our
Securities and Exchange Commission filings available at http://www.sec.gov.
disclaimers
Any reproduction or further distribution of this
article without the express written consent of CEOCFOinterviews.com is prohibited.
|